工業級ATmega1284P-PU 帶有128K系統內可編程Flash存儲器PDIP-40封裝

128K Bytes self-programming Flash Program Memory, 16K Bytes SRAM, 4K Bytes EEPROM, two 16-bit Timer/Counters, two 8-bit Timer/Counters, Real Time Counter, 8 Channel 10-bit A/D-converter(TQFP/MLF). JTAG Interface for On-chip Debug. Up to 20 MIPS throughput at 20 MHz. The ATmega1284P is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATmega1284P achieves throughputs approaching 1 MIPS per MHz allowing the system designer to optimize power consumption versus processing speed.

ATmega1284P-PU 產品特性

• High-performance, Low-power AVR? 8-bit Microcontroller
• Advanced RISC Architecture
  – 131 Powerful Instructions – Most Single-clock Cycle Execution
  – 32 x 8 General Purpose Working Registers
  – Fully Static Operation
  – Up to 20 MIPS Throughput at 20 MHz
  – On-chip 2-cycle Multiplier
• Nonvolatile Program and Data Memories
  – 128K Bytes of In-System Self-Programmable Flash
  Endurance: 10,000 Write/Erase Cycles
  – Optional Boot Code Section with Independent Lock Bits
  In-System Programming by On-chip Boot Program
  True Read-While-Write Operation
  – 4K Bytes EEPROM
  Endurance: 100,000 Write/Erase Cycles
  – 16K Bytes Internal SRAM
  – Programming Lock for Software Security
• JTAG (IEEE std. 1149.1 Compliant) Interface
  – Boundary-scan Capabilities According to the JTAG Standard
  – Extensive On-chip Debug Support
  – Programming of Flash, EEPROM, Fuses, and Lock Bits through the JTAG Interface
• Peripheral Features
  – Two 8-bit Timer/Counters with Separate Prescalers and Compare Modes
  – Two 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture
  Mode
  – Real Time Counter with Separate Oscillator
  – Six PWM Channels
  – 8-channel, 10-bit ADC
  Differential mode with selectable gain at 1x, 10x or 200x
  – Byte-oriented Two-wire Serial Interface
  – Two Programmable Serial USART
  – Master/Slave SPI Serial Interface
  – Programmable Watchdog Timer with Separate On-chip Oscillator
  – On-chip Analog Comparator
  – Interrupt and Wake-up on Pin Change
• Special Microcontroller Features
  – Power-on Reset and Programmable Brown-out Detection
  – Internal Calibrated RC Oscillator
  – External and Internal Interrupt Sources
  – Six Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, Standby
  and Extended Standby
• I/O and Packages
  – 32 Programmable I/O Lines
  – 40-pin PDIP, 44-lead TQFP, and 44-pad QFN/MLF
• Operating Voltages
  – 1.8 - 5.5V for ATmega1284P
• Speed Grades
  – 0 - 4 MHz @ 1.8 - 5.5V
  – 0 - 10 MHz @ 2.7 - 5.5V
  – 0 - 20 MHz @ 4.5 - 5.5V
• Power Consumption at 1 MHz, 1.8V, 25°C
  – Active: TBD μA
  – Power-down Mode: TBD μA
  – Power-save Mode: TBD μA (Including 32 kHz RTC)
  8-bit
  Microcontroller
  with 128K Bytes
  In-System
  Programmable
  Flash
  ATmega1284P
  Preliminary
  8059B–AVR–05/08

ATmega1284P-PU 訂購型號

ATmega1284P-PU 技術支持

1. ATMEL 愛特梅爾AVR 微控制器ATmega1284P 數據手冊DataSheet 下載. PDF（簡潔版）
2. ATMEL 愛特梅爾AVR 微控制器ATmega1284P 數據手冊DataSheet 下載. PDF（完整版）
3. Atmel 愛特梅爾AVR 微控制器簡介.PDF (編號:Tech AVR 000)MLF 32
4. 面向新手的AVR 開發工具,及基本知識.PDF(編號:Tech AVR 001)
5. 使用AVR 定時/計數器的PWM功能設計要點 .PDF (編號:Tech AVR 002)
6. AVR指令集（版本：0856G–AVR–07/08）
7. 相關產品選型（ Excel 文檔格式）
8. AVR 微控制器汽車應用解決方案 . pdf
9. AVR 微控制器選型指南. pdf
10. ATMEL 愛特梅爾公司全線產品目錄. pdf