AT49F1024A 1Mbit,Flash存儲器

1M bit (64K x 16), 5-Volt Read and 5-Volt Write Flash

The AT49F1024A is a 5-volt-only in-system Flash memory organized as 65,536 words by 16 bits. Manufactured with Atmel’s advanced nonvolatile CMOS technology, the devices offer access times to 45 ns with power dissipation of just 275 mW over the commercial temperature range. When the device is deselected, the CMOS standby current is less than 100 μA. To allow for simple in-system reprogrammability, the AT49F1024A does not require high-input voltages for programming. Five-volt-only commands determine the read and programming operation of the device. Reading data out of the device is similar to reading from an EPROM. Reprogramming the AT49F1024A is performed by erasing a block of data (entire chip or main memory block) and then programming on a word-byword basis. The typical word programming time is a fast 10 μs. The end of a program cycle can be optionally detected by the Data Polling feature. Once the end of a byte program cycle has been detected, a new access for a read or program can begin. The typical number of program and erase cycles is in excess of 10,000 cycles.

AT49F1024A 特性

• Single-voltage Operation
  – 5V Read
  – 5V Reprogramming
• Fast Read Access Time – 45 ns
• Internal Program Control and Timer
• 8K Word Boot Block with Lockout
• Fast Erase Cycle Time – 1.5 seconds
• Word-by-word Programming – 10 μs/Word Typical
• Hardware Data Protection、
• Data Polling for End of Program Detection
• Small 10 x 14 mm VSOP Package
• Typical 10,000 Write Cycles

AT49F1024A 訂購型號

AT49F1024A 技術支持

1. ATMEL 愛特梅爾Flash 存儲器AT49F1024A 數據手冊DataSheet 下載. PDF（PDF 文件格式完整版）
2. 并行Flash 產品選型指南（ Excel 文檔格式）
3. ATMEL 愛特梅爾公司全線產品目錄. pdf