AT29C020 2Mbit,Flash存儲器

2M bit (256k x 8), 5-Volt Read and 5-Volt Write Flash

The AT29C020 is a 5-volt-only in-system Flash programmable and erasable read-only memory (PEROM). Its 2 megabits of memory is organized as 262,144 bytes. Manufactured with Atmel’s advanced nonvolatile CMOS technology, the device offers access times to 70 ns with power dissipation of just 220 mW over the industrial temperature range. When the device is deselected, the CMOS standby current is less than 300 μA. Device endurance is such that any sector can typically be written to in excess of 10,000 times. To allow for simple in-system reprogrammability, the AT29C020 does not require high input voltages for programming. Five-volt-only commands determine the operation of the device. Reading data out of the device is similar to reading from an EPROM. Reprogramming the AT29C020 is performed on a sector basis; 256 bytes of data are loaded into the device and then simultaneously programmed. During a reprogram cycle, the address locations and 256 bytes of data are internally latched, freeing the address and data bus for other operations. Following the initiation of a program cycle, the device will automatically erase the sector and then program the latched data using an internal control timer. The end of a program cycle can be detected by DATA polling of I/O7. Once the end of a program cycle has been detected, a new access for a read or program can begin.

AT29C020 特性

• Fast Read Access Time – 70 ns
• 5-volt Only Reprogramming
• Sector Program Operation
  – Single Cycle Reprogram (Erase and Program)
  – 1024 Sectors (256 Bytes/Sector)
  – Internal Address and Data Latches for 256 Bytes
• Internal Program Control and Timer
• Hardware and Software Data Protection
• Two 8K Bytes Boot Blocks with Lockout
• Fast Sector Program Cycle Time – 10 ms
• DATA Polling for End of Program Detection
• Low Power Dissipation
  – 40 mA Active Current
  – 300 μA CMOS Standby Current
• Typical Endurance > 10,000 Cycles
• Single 5V ±10% Supply
• CMOS and TTL Compatible Inputs and Outputs
• Green (Pb/Halide-free) Packaging Option

AT29C020 訂購型號

AT29C020 技術支持

1. ATMEL 愛特梅爾Flash 存儲器AT29C020 數據手冊DataSheet 下載. PDF（PDF 文件格式完整版）
2. 并行Flash 產品選型指南（ Excel 文檔格式）
3. ATMEL 愛特梅爾公司全線產品目錄. pdf
4. AT29C020 Reliability Qualification Report (Qualification, 11 pages, updated 7/06). pdf
5. AT29 Series Software Chip Erase (4 pages, updated 10/98) . pdf
   This Application Note describes Software Chip Erase for the AT29 Series Flash family.
6. Atmel AT29 Flash Memories (8 pages, updated 10/98) . pdf
   This Application Note describes Atmel's AT29 Flash Memories.
7. Programming Atmel's AT29 Flash Family (12 pages, updated 10/98). pdf
   This Application Note describes the design benefits of Atmel's AT29 Flash architecture as well as how the device ID feature is used to adjust for varying densities and supply voltages.