AT93C46A 2Kbit,3線串行EEPROM存儲器

1Kbit, 3-wire Bus Serial Automotive EEPROM, supports x16 data format memory organization.

The AT93C46A provides 1024 bits of serial electrically-erasable programmable read-only memory (EEPROM) organized as 64 words of 16 bits each. The device is optimized for use in many automotive applications where low-power and low-voltage operation are essential. The AT93C46A is available in space-saving 8-lead JEDEC SOIC and 8-lead TSSOP packages. The AT93C46A is enabled through the Chip Select pin (CS) and accessed via a three-wire serial interface consisting of Data Input (DI), Data Output (DO), and Shift Clock (SK). Upon receiving a Read instruction at DI, the address is decoded and the data is clocked out serially on the data output pin DO. The write cycle is completely self-timed and no separate erase cycle is required before write. The write cycle is only enabled when the part is in the erase/write enable state. When CS is brought high following the initiation of a write cycle, the DO pin outputs the ready/busy status of the part. The AT93C46A is available in 2.7V to 5.5V versions.

AT93C46A 特性

• Low-voltage and Standard-voltage Operation
  –2.7 (VCC = 2.7V to 5.5V)
• Three-wire Serial Interface
• 2 MHz Clock Rate Compatibility
• Self-timed Write Cycle (10 ms max)
• High Reliability
  –Endurance: 1 Million Write Cycles
  –Data Retention: 100 Years
• Lead-free/Halogen-free Devices Available
• 8-lead JEDEC SOIC and 8-lead TSSOP Packages

AT93C46A 訂貨型號：

AT93C46A 技術支持：

1. ATMEL 愛特梅爾汽車級EEPROM 存儲器AT93C46A 數據手冊DataSheet 下載. PDF（PDF 文件格式完整版）
2. 串行EEPROM 產品選型指南（ Excel 文檔格式）
3. Interfacing AT93CXXX Serial EEPROMs with AT89CX051 MCU (4 pages, updated 10/98)
   This Application Note demonstrates interfacing AT89CX051 Microcontrollers to the AT93CXX 3-Wire type of Serial EEPROMs.
4. 中文版ATMEL 汽車應用解決方案 . pdf
5. 英文版ATMEL 汽車應用解決方案 . pdf
6. 嵌入式系統中EEPROM文件系統的設計與實現 . PDF
7. ATMEL 愛特梅爾公司全線產品目錄. pdf